SEMA Approved cantilever racking inspectors Bromsgrove
Expert Cantilever Racking Inspections
Arrange a professional cantilever racking inspection in Bromsgrove.
Our experienced inspectors help you avoid risk and maintain compliance with HSE & PUWER regulations.
Meet HSE, SEMA and auditor standards for cantilever racking in Bromsgrove.
Our inspections help protect your site, staff and operations while ensuring full compliance.
Cantilever racking systems are often used to store long-length and bulky materials that are not suited to standard pallet racking, such as timber, steel, piping and sheet products. For businesses in Bromsgrove, maintaining these systems correctly is critical to meeting compliance requirements and avoiding risk.
Because cantilever racks are often subjected to larger loads and higher impact risks, the risk of significant damage increases if damage is left unchecked. Our qualified cantilever racking inspectors undertake thorough inspections to spot defects, flag risks, and make you aware of any concerns before they lead to failure.
During the inspection, our inspector will assess your racking system in detail to help keep your site fully compliant and in good condition. With extensive industry experience, we can also offer guidance on damage prevention to reduce the risk of future damage, helping your business minimise disruption and protect revenue.
Why Cantilever Racking Inspections Are Important
- Annual Inspections: Strongly recommended under HSG76 and PUWER, annual checks confirm your racking is suitable for continued use.
- Minimise Downtime: Early detection reduces the risk of disruption and operational delays.
- Protect Your Workforce: Support a safer workplace and reduce the risk of accidents.
Why Choose Us?
- Cantilever Racking Expertise: Specialists in long-load and heavy-duty racking inspections.
- Experienced Inspectors: Our team has extensive knowledge with leading racking brands, including Stakapal, Wickens, Space Productiv, Prodek, and Ohra.
- SEMA Approved Inspector Accreditation: Work undertaken to the highest industry standards.
- Tailored Recommendations: Solutions designed around your specific site requirements.
What you can expect from our cantilever racking inspection:
After your cantilever racking inspection is completed in Bromsgrove, you will receive a fully documented report with practical recommendations to manage any issues found. Our comprehensive cantilever racking audit will assess the following areas:
- Cantilever column conditions & structural integrity
- Cantilever arms for damages, twisting & arm levels ensuring they have not dropped below horizontal
- Bracing gate & horizontal bracing conditions, ensuring the system is able to maintain rigidity
- Cantilever bases are in a good condition to enable the racks to be sufficiently supported
- Arm retention is suitable for continued use (Arm pins, bolts or connectors to columns)
- Floor fixing bolts are sufficient & secure, keeping your system fully grounded as intended
- Load suitability, load clearances & damage prevention techniques and recommendations, ensuring your Cantilever rack system remains safe, compliant & a vital asset to your business
- Ground suitability for the even weight distribution of the racks and the safe operation for MHE operatives.
- Cantilever racking safe working loads are displayed and correct for the racking current configurations
Customers We Have Carried Out Inspections For
Cantilever Racking Inspection Training Bromsgrove
Equip your team in Bromsgrove and across Worcestershire with the skills to perform regular, in-house cantilever racking inspections with our tailored Rack Inspection Training Courses.
Designed to meet industry standards, these courses ensure your team understands safe cantilever racking management and upkeep.
Course Content Overview:
- Overview of cantilever racking design and load-bearing principles.
- Recognising damage indicators in accordance with SEMA standards.
- Undertaking in-house inspections aligned with SEMA, HSG76 and PUWER REGULATIONS.
- Practical exercises for real-world application.
- Health and safety practices and regulations.
- Using inspection checklists and the correct tools for assessments.
- Customised to match your operational needs.
- Delegates receive 3-year certification to undertake PRRS (Person Responsible for Rack Safety) inspections.
Every training session is led by knowledgeable industry professionals who combine technical expertise with hands-on knowledge.
Rack Inspection Reviews
FREE Racking Inspection Checklist No Email Required
Looking for a FREE racking inspection checklist you can use straight away? You’re in the right place.
We’ve created a simple, printable racking inspection tick sheet to help warehouse managers and safety officers carry out internal pallet racking inspections quickly and confidently. And unlike many others, we don’t ask for your email address or any personal details to download it.
Racking Manufacturers We Commonly Inspect
Cantilever Racking Inspections FAQs
Why do I need to have a cantilever racking inspection in Bromsgrove?
Racking and storage equipment is covered by PUWER (Provision and Use of Work Equipment Regulations) and is recommended to be checked at least annually by a technically competent person, of which a SEMA-approved inspector satisfies this requirement.
This requirement is further supported by HSE guidance, including:
- HSG76 – Warehousing and storage – A guide to health and safety
- Workplace health, safety and welfare regulations 1992
An annual racking inspection will help ensure that your racking has been installed to manufacturer specifications, has accurate weight loading information displayed, is correct and being used correctly for its current application, and is in a good serviceable condition.
What are the benefits of using a SEMA approved inspector?
- We will ensure the compatibility and suitability of your storage equipment
- Fully Approved Inspectors as recognised by the HSE
- We undertake comprehensive inspections, providing a fully detailed report with clear locations and recommended remedial actions
- Enable you to achieve and maintain compliance with regard to Health and Safety legislation & PUWER regulations
- Check that your racking installation has been installed to the manufacturer’s specifications
- Check load notices are accurate and reflect current racking configurations
- Provide advice on areas showing repeated damage helping prevent the need for replacement components
- Assess the pallet and pallet load suitability on site
- Offer guidance on rack-related health and safety issues, keeping you up to date with regulations
- Provide a detailed specification of your storage equipment
- Full client debrief following the inspection, where recordings can be found and guidance given
Aren’t all Bromsgrove racking inspectors SEMA approved anyway?
No, this is not the case.
Our advice is always to ask for the inspector’s SARI number, which is a recognised identifier assigned to each SEMA-approved inspector. This should be included on your racking inspection report.
In addition, there are PUWER racking inspectors who offer damage report-only inspections. Our concern with this approach is questionable compliance, as important installation checks and health and safety issues may be missed.
Our view is simple, if you are looking for a racking inspector, why choose a limited report when you can receive a complete assessment from a competent inspector?
Are yearly racking inspections all that’s required?
An annual racking inspection is recommended, as well as when racking systems have been relocated or altered.
In cases where work has been undertaken by installers who are not SEMA-approved (SEIRS), it is advised that a thorough assessment is carried out before the system is put back into use to ensure it has been completed in line with requirements.
Alongside yearly inspections, routine internal checks should take place by trained personnel at frequent intervals throughout the year.
These individuals should attend a racking awareness course and have a certified level of competence. They can then perform your internal inspections, which should be logged to satisfy HSE and audit requirements.
Do you offer post-inspection support and recommendations?
We pride ourselves on delivering strong aftercare support, and as a result have built trusted partnerships throughout the country.
Our team is available to provide ongoing support and advice to ensure you remain one step ahead of all things related to your storage systems.
As an independent inspection company, we do have highly recommended contacts within the storage industry, all of whom are SEMA-approved professionals offering racking repairs and installation services.
Details can be supplied should you need them if you require any follow-up work after your inspection.
Why should I use UK Rack Inspection for my annual racking inspection?
The UK Rack Inspection team has been in the storage industry for more than 30 years, gaining valuable experience while helping businesses across the UK.
From there, we established our own company to offer a more advanced inspection service we believe is essential for our customers. Our experience has enabled us to recognise what is needed to deliver the best possible service.
We are committed to the following:
- Fully accredited SEMA Approved Inspectors (SARI)
- Straightforward, easy-to-understand reporting
- Clear communication of urgent risks, supported by RED risk reports when needed
- Fully independent inspections with no conflict of interest
- Full compliance with SEMA inspection standards
- Guidance on preventing future damage
- Ensuring racking is installed and used in line with manufacturer specifications
- Support and guidance available post-inspection